My scamp
I bought the kit during the pandemic. I’m going to finish in the
summer, I just don’t know which year.
Going in circles
Cutting circles, circles for days
Fixing a too-low bulkhead
Some minor odds and ends fixups before I start in on the hatch covers
Fillets
Fillets take a long time to get right
Planking
The boat starts to look like a boat once the hull planks go on
A quick note on the water ballast
Changing up how the doubler works for the bottom valve
Finishing the centerboard pin
Redrilled and got the pin inserted and aligned, also finished final details on the board itself
Nearing the end of cleats
Glassing the footwell, almost ready for garboards
Cleats, cleats, and more cleats
Getting cleats glued in all over the boat
Bulkhead 1 & glassing the mastbox
Finish glassing the mastbox and attaching bulkheads 1 and 8
An endless amount of filleting
Lots of bulkhead fillets, but very few screws to be had…
Footwell, centerboard, stem, bulkhead 3 - oh my!
Gluing things up, hopefully in alignment
Mast ramp? What mast ramp?
Dry fitting stem, bulkheads 1 to 3, and puzzling on the mast trunk